I just bought another z50a k1 its the us version with a battery . the wiring loom is shot , I looked at shirebikes and repo ones selling for £60.
Can I run the bike with out a battery when new loom purchased?
z50a k1 wiring/battery
- upnorth62
- Posts: 202
- Joined: Sat Dec 09, 2017 7:03 pm
- Rides:: Z50A resto-build
- Location: Sunny Manchester.
- steveST100
- Posts: 1889
- Joined: Tue Oct 25, 2011 3:04 pm
- Rides:: 1983 C50LAC 1976 ST100 1980 ST70
- Location: Clitheroe Lancs
Re: z50a k1 wiring/battery
My old Z50K1 fitted with a ST70 engine taken out to 88cc ran with a cut down ST70 loom, but 6V C50/70 loom could be used if you want.Battery was a bigger 6v type in a modded stock battery carrier.
Another one i build had only 1' of wire on the bike,black from engine to coil,no battery.
steve g
Another one i build had only 1' of wire on the bike,black from engine to coil,no battery.
steve g
- upnorth62
- Posts: 202
- Joined: Sat Dec 09, 2017 7:03 pm
- Rides:: Z50A resto-build
- Location: Sunny Manchester.
Re: z50a k1 wiring/battery
As always thank you
I have a 3 wire stator , black ,yellow.green so to run it up on basic wiring, black to coil, green for earth and yellow is for lights?
I have a 3 wire stator , black ,yellow.green so to run it up on basic wiring, black to coil, green for earth and yellow is for lights?
You do not have the required permissions to view the files attached to this post.
- upnorth62
- Posts: 202
- Joined: Sat Dec 09, 2017 7:03 pm
- Rides:: Z50A resto-build
- Location: Sunny Manchester.
Re: z50a k1 wiring/battery
Black wire from stator connected to coil then earthed it out , its a runner.
You do not have the required permissions to view the files attached to this post.