Gear change pedal.....help needed

Are you new to the forum? Please come in here and introduce yourself, please don't forget to check out the rules as well!
Post Reply
Alang
Posts: 19
Joined: Fri Jan 25, 2019 7:16 pm
Rides:: 1990 Honda c90. Yamaha fizzy Kawasaki KE 125
Location: Shropshire

Gear change pedal.....help needed

Post by Alang » Fri Dec 27, 2019 5:48 pm

Hi there,
Does anybody know what screw is required for the gear change pedal on a 1990 square headlight model and where to get one from please. Mine is a chewed up Allen bolt by the look of it and I am having trouble getting the gear pedal off. Any helpful advice would be very grateful.
Thanks,

User avatar
bikerbaker
Posts: 2810
Joined: Thu Nov 07, 2013 2:35 pm
Rides:: 1990 C90, 2016 Kayak 110, Riders Cub, 2xSV650, BMW F800GT, Buell XB12R CT90/110
Location: Rochford Essex

Re: Gear change pedal.....help needed

Post by bikerbaker » Fri Dec 27, 2019 6:06 pm

Honda part no 92101060200A 6 x 20 hex bolt.

82p from Fowlers. :lol:

Might have the wrong pitch Allen screw put in though. I'm sure someone more qualified will be along with better advice than I could give but if it won't come out then I would get busy with a slitting disc and stud remover.

Alang
Posts: 19
Joined: Fri Jan 25, 2019 7:16 pm
Rides:: 1990 Honda c90. Yamaha fizzy Kawasaki KE 125
Location: Shropshire

Re: Gear change pedal.....help needed

Post by Alang » Fri Dec 27, 2019 6:14 pm

Hi Bikerbaker
Thank you very much for your prompt reply. I shall get one ordered and see what I can do.
Thanks again

User avatar
wightegi
Posts: 9710
Joined: Tue Sep 01, 2009 7:23 pm
Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
Location: Isle of Wight

Re: Gear change pedal.....help needed

Post by wightegi » Fri Dec 27, 2019 10:34 pm

Just a standard M6 bolt.10 for 57p from Toolstation. ;)

JOHNBOY
Posts: 1705
Joined: Sat Apr 13, 2013 2:03 pm
Rides:: HONDA SUZUKI

Re: Gear change pedal.....help needed

Post by JOHNBOY » Fri Dec 27, 2019 10:38 pm

its just a std pitch 6mm bolt or capscrew i think its m6 1mm pitch

Alang
Posts: 19
Joined: Fri Jan 25, 2019 7:16 pm
Rides:: 1990 Honda c90. Yamaha fizzy Kawasaki KE 125
Location: Shropshire

Re: Gear change pedal.....help needed

Post by Alang » Fri Dec 27, 2019 11:09 pm

Thank you all for your help. Much appreciated.

User avatar
Bogger
Maintenance Stasi
Posts: 4273
Joined: Tue Sep 01, 2009 7:40 pm
Rides:: 3 x C90,BMW R1200st, BMW R80RT, Honda Mode , Super Cub C125A, Yamaha Majesty 250
Location: Warrington

Re: Gear change pedal.....help needed

Post by Bogger » Sun Dec 29, 2019 5:40 pm

Nick one out of the back of the fuel tank.

Bogger

Post Reply