Hi there,
Does anybody know what screw is required for the gear change pedal on a 1990 square headlight model and where to get one from please. Mine is a chewed up Allen bolt by the look of it and I am having trouble getting the gear pedal off. Any helpful advice would be very grateful.
Thanks,
Gear change pedal.....help needed
-
- Posts: 19
- Joined: Fri Jan 25, 2019 7:16 pm
- Rides:: 1990 Honda c90. Yamaha fizzy Kawasaki KE 125
- Location: Shropshire
- bikerbaker
- Posts: 2817
- Joined: Thu Nov 07, 2013 2:35 pm
- Rides:: 1990 C90, 2016 Kayak 110, Riders Cub, 2xSV650, BMW F800GT, Buell XB12R CT90/110
- Location: Rochford Essex
Re: Gear change pedal.....help needed
Honda part no 92101060200A 6 x 20 hex bolt.
82p from Fowlers.
Might have the wrong pitch Allen screw put in though. I'm sure someone more qualified will be along with better advice than I could give but if it won't come out then I would get busy with a slitting disc and stud remover.
82p from Fowlers.
Might have the wrong pitch Allen screw put in though. I'm sure someone more qualified will be along with better advice than I could give but if it won't come out then I would get busy with a slitting disc and stud remover.
-
- Posts: 19
- Joined: Fri Jan 25, 2019 7:16 pm
- Rides:: 1990 Honda c90. Yamaha fizzy Kawasaki KE 125
- Location: Shropshire
Re: Gear change pedal.....help needed
Hi Bikerbaker
Thank you very much for your prompt reply. I shall get one ordered and see what I can do.
Thanks again
Thank you very much for your prompt reply. I shall get one ordered and see what I can do.
Thanks again
- wightegi
- Posts: 9724
- Joined: Tue Sep 01, 2009 7:23 pm
- Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
- Location: Isle of Wight
Re: Gear change pedal.....help needed
Just a standard M6 bolt.10 for 57p from Toolstation.
-
- Posts: 1710
- Joined: Sat Apr 13, 2013 2:03 pm
- Rides:: HONDA SUZUKI
Re: Gear change pedal.....help needed
its just a std pitch 6mm bolt or capscrew i think its m6 1mm pitch
-
- Posts: 19
- Joined: Fri Jan 25, 2019 7:16 pm
- Rides:: 1990 Honda c90. Yamaha fizzy Kawasaki KE 125
- Location: Shropshire
Re: Gear change pedal.....help needed
Thank you all for your help. Much appreciated.
- Bogger
- Maintenance Stasi
- Posts: 4279
- Joined: Tue Sep 01, 2009 7:40 pm
- Rides:: 3 x C90,BMW R1200st, BMW R80RT, Honda Mode , Super Cub C125A, Yamaha Majesty 250
- Location: Warrington
Re: Gear change pedal.....help needed
Nick one out of the back of the fuel tank.
Bogger
Bogger