North Coast 500 22nd - 29th of June 2018

Discuss general riding stories and adventures here.
User avatar
onittino3
Posts: 952
Joined: Fri Sep 04, 2015 6:52 pm
Rides:: Honda C90, Honda Cb500x
Location: Merstham Surrey

Re: North Coast 500 22nd - 29th of June 2018

Post by onittino3 » Wed Apr 11, 2018 10:59 pm

Bit of an update, trailer is all finished, and ramp built, i have trield it with the innova and cub and they both fit although the cubs will have to go on top and tail, but i wanted a small trailer.

Image
Image

Image
Image

User avatar
Diesel Dave
Posts: 11055
Joined: Tue Oct 13, 2009 7:25 pm
Rides:: 1965 Enfield Diesel, 2017 Sterling, Modenas Kriss and CT200 - the only Cub left
Location: Brentwood, Essex

Re: North Coast 500 22nd - 29th of June 2018

Post by Diesel Dave » Thu Apr 12, 2018 9:17 am

Terry, I always find it better to ‘cross straps’ when tying down; so the straps from the bars would go to the rear of the trailer and vice versa.

No doubt someone with lorry loading and strapping experience will know best.

I also hate straps with hooks and they can bounce off when the bike suspension bounces along the road.

User avatar
bikerbaker
Posts: 2809
Joined: Thu Nov 07, 2013 2:35 pm
Rides:: 1990 C90, 2016 Kayak 110, Riders Cub, 2xSV650, BMW F800GT, Buell XB12R CT90/110
Location: Rochford Essex

Re: North Coast 500 22nd - 29th of June 2018

Post by bikerbaker » Thu Apr 12, 2018 9:27 am

onittino3 wrote:
Wed Apr 11, 2018 10:59 pm
Bit of an update, trailer is all finished, and ramp built, i have trield it with the innova and cub and they both fit although the cubs will have to go on top and tail, but i wanted a small trailer.
Sorry, got to ask (think I know the answer). Does the trailer go through the passageway on it's journey to the road? :D

I had a boat trailer that used to be kept in my back garden, that needed pulling through an arch on it's side. I made a nifty little trolley to be able to do it on my own.

User avatar
onittino3
Posts: 952
Joined: Fri Sep 04, 2015 6:52 pm
Rides:: Honda C90, Honda Cb500x
Location: Merstham Surrey

Re: North Coast 500 22nd - 29th of June 2018

Post by onittino3 » Thu Apr 12, 2018 4:34 pm

bikerbaker wrote:
Thu Apr 12, 2018 9:27 am
onittino3 wrote:
Wed Apr 11, 2018 10:59 pm
Bit of an update, trailer is all finished, and ramp built, i have trield it with the innova and cub and they both fit although the cubs will have to go on top and tail, but i wanted a small trailer.
Sorry, got to ask (think I know the answer). Does the trailer go through the passageway on it's journey to the road? :D

I had a boat trailer that used to be kept in my back garden, that needed pulling through an arch on it's side. I made a nifty little trolley to be able to do it on my own.
Yes has to go through a 1 meter wide allyway on its side :shock:, once its out it will be living at Chris's house 8-)

User avatar
onittino3
Posts: 952
Joined: Fri Sep 04, 2015 6:52 pm
Rides:: Honda C90, Honda Cb500x
Location: Merstham Surrey

Re: North Coast 500 22nd - 29th of June 2018

Post by onittino3 » Thu Apr 12, 2018 4:39 pm

Diesel Dave wrote:
Thu Apr 12, 2018 9:17 am
Terry, I always find it better to ‘cross straps’ when tying down; so the straps from the bars would go to the rear of the trailer and vice versa.

No doubt someone with lorry loading and strapping experience will know best.

I also hate straps with hooks and they can bounce off when the bike suspension bounces along the road.
Good Idea, I havent fully worked out how im going to tie it all down, i still have another 8 tie down loops to bolt on if required, the picture is just a first attempt, i do have other straps with carabiner ends like the handlebar ones :?

culfy
Posts: 1288
Joined: Thu May 27, 2010 2:47 pm
Rides:: several honda c90's c70 and c50, lambretta li special puch and a honda cbf
Location: sheffield

Re: North Coast 500 22nd - 29th of June 2018

Post by culfy » Thu Apr 12, 2018 8:34 pm

Following this thread with a lot of interest as I would also like to do this ride one day ,and also a bit of fabrication in the thread is a bonus.Now don't shoot me down as I also have no experience of towing a bike trailer ,but would the rear facing bike with a screen on struggle with the wind drag ,don't want you to start your journey with a broken screen, good luck on your ride.

User avatar
onittino3
Posts: 952
Joined: Fri Sep 04, 2015 6:52 pm
Rides:: Honda C90, Honda Cb500x
Location: Merstham Surrey

Re: North Coast 500 22nd - 29th of June 2018

Post by onittino3 » Thu Apr 12, 2018 8:48 pm

culfy wrote:
Thu Apr 12, 2018 8:34 pm
Following this thread with a lot of interest as I would also like to do this ride one day ,and also a bit of fabrication in the thread is a bonus.Now don't shoot me down as I also have no experience of towing a bike trailer ,but would the rear facing bike with a screen on struggle with the wind drag ,don't want you to start your journey with a broken screen, good luck on your ride.
Culfy, thanks your right...it will probably break the screen, luckily Chris's bike will be the one to go on backwards :lol:, I will have to remove his screen before we set off, or we think if we put a block of wood infront of the second bikes wheel to space it back slightly they will both fit front ways, as its the handlebars that we need to offset.

User avatar
Capitano
Posts: 5757
Joined: Wed Oct 27, 2010 8:05 pm
Rides:: '92 C90, '97 Divvy 6, 36V home-built e-bike
Location: West Sussex
Contact:

Re: North Coast 500 22nd - 29th of June 2018

Post by Capitano » Thu Apr 12, 2018 9:35 pm

Diesel Dave wrote:
Thu Apr 12, 2018 9:17 am
No doubt someone with lorry loading and strapping experience will know best.
Barker, come on down... 8-)

culfy
Posts: 1288
Joined: Thu May 27, 2010 2:47 pm
Rides:: several honda c90's c70 and c50, lambretta li special puch and a honda cbf
Location: sheffield

Re: North Coast 500 22nd - 29th of June 2018

Post by culfy » Thu Apr 12, 2018 9:52 pm

The block of wood sounds a good idea, as when you arrive if your like me, you will just want to get on them and ride.

User avatar
Newtsalad
Admin & site janitor.
Posts: 17611
Joined: Fri May 01, 2009 8:30 am
Rides:: XL1200c, Cali III, C125,GS750,XV535,XL350,BN125,C90's,C200's,CT200,Little Cub's
Location: Essex boy loose in Suffolk!

Re: North Coast 500 22nd - 29th of June 2018

Post by Newtsalad » Thu Apr 12, 2018 11:14 pm

Don't tie down on the mirrors. The switch gear will turn.. If the grips are on firm, and properly with the correct adhesive, Choke a rope loop or Quoit around the grip and anchor down on that. Open the throttle mid way so as not to put undue forces on the carb/ cable.

Ideally, the most reliable anchorage will be below the suspension, Ie. over the wheels. Although anchorage above the suspension,m if pulled tight, has the advantage of having some spring to take up slack, if any should occur.

Post Reply