C90Club.co.uk

lost yer nutz?

DAX / CHALY

if you misplace the nuts that hold your wheels to your hubs you are going to struggle getting replacements , unlike conventional 8mm nuts those have a 14mm spanner head , and sit in the recessed section og youtr hub , normal 13mm headed ones will fut , but they can turn and chew up your hub

shires bikes sell sets of 4 in galvanised at £5 + postage + vat , this is £15.80 delivered (uk) for 8

oo racing sell a bolt kit , 4 x stainless bolts 20mm long (to short!!!) flat and spring washers , at £5 per wheel , so again that is almost £14 delivered for 8 bolts

what I have here , is correct 14mm head STAINLESS steel nuts and 8mm socket capscrews and flat/spring wahers on STAINLESS steel

comes as a set of 8 (one full bike) and delivered to your door UK ONLY for £14

sorry can only do UK only at this point

What grade stainless are they ?

A2 was recommended , actually A2 was the only type available , and as stated before thet are from a automotive background ,

alternatives are chinease made galvanised ones from shires bikes , people can buy those if they wush


https://www.shirebikes.co.uk/products/h ... 6v-dax-12v

I added a price to the header.

and such value as trew pritchard would say

Capitano wrote: ↑

Mon Jul 27, 2020 10:28 am

I added a price to the header.

Hi, just wondering if you still have these bolt sets ?

Shootingstar1954 wrote: ↑

Thu Jan 21, 2021 11:24 pm

Capitano wrote: ↑

Mon Jul 27, 2020 10:28 am

I added a price to the header.

Hi, just wondering if you still have these bolt sets ?

Not mine, I'm afraid. The OP was alanb.

You could always PM him and ask.

A2 stainless is not recommended for suspension parts ,it is ok to bolt on body panels .