Engine Parts
-
- Posts: 154
- Joined: Thu May 07, 2009 7:30 am
- Rides:: Hondas, lots of them
Engine Parts
I have boxes of cub 90 engine parts, from heads, gearboxes, clutches, covers, to small items. All the parts are good and have been taken from donor engines that have been made into larger capacity beasts. Also some C50 parts as well.
If anybody needs anything let me know.
If anybody needs anything let me know.
- yellasei
- Posts: 155
- Joined: Mon Jun 22, 2009 5:17 pm
- Rides:: nowt at the mo!!
- Location: birkdale, southport
Re: Engine Parts
what 50 parts do you have and which model are they from??
-
- Posts: 154
- Joined: Thu May 07, 2009 7:30 am
- Rides:: Hondas, lots of them
Re: Engine Parts
Heads, cranks, cases, gearboxes, clutch, kickstarts, just about all engine parts, all 6V.yellasei wrote:what 50 parts do you have and which model are they from??
- Newtsalad
- Admin & site janitor.
- Posts: 17624
- Joined: Fri May 01, 2009 8:30 am
- Rides:: XL1200c, Cali III, C125,GS750,XV535,XL350,BN125,C90's,C200's,CT200,Little Cub's
- Location: Essex boy loose in Suffolk!
Re: Engine Parts
Hi Dude
Do you have a small (approx 50-60mm) 2 hole points cover off of an early OHV engine by any luck? It's for my 1964 C100.
I also have a '79 90zz with engine parts missing, I think clutch, generator etc. Not sure exactly. Maybe I could post up some photo's of what I do have, and perhaps you would be kind enough to let me know if you have what I need.
Do you have a small (approx 50-60mm) 2 hole points cover off of an early OHV engine by any luck? It's for my 1964 C100.
I also have a '79 90zz with engine parts missing, I think clutch, generator etc. Not sure exactly. Maybe I could post up some photo's of what I do have, and perhaps you would be kind enough to let me know if you have what I need.
- yellasei
- Posts: 155
- Joined: Mon Jun 22, 2009 5:17 pm
- Rides:: nowt at the mo!!
- Location: birkdale, southport
Re: Engine Parts
do you have a piston from a 50zz?? i need one and it does'nt matter on the condition, for a template to machine a 70 piston to match my 50 head.
- CeeGee
- Posts: 1378
- Joined: Tue May 05, 2009 12:03 am
- Rides:: BMW R80 Airhead, 1987 HondaC90, 1981 Suzuki GSX1100 & Occasional Sheep
- Location: North Beds.
- Contact:
Re: Engine Parts
Do you have a decent head for an '86 12V cub going? If so, how much do you want for it?
-
- Posts: 154
- Joined: Thu May 07, 2009 7:30 am
- Rides:: Hondas, lots of them
Re: Engine Parts
H NewtNewtsalad wrote:Hi Dude
Do you have a small (approx 50-60mm) 2 hole points cover off of an early OHV engine by any luck? It's for my 1964 C100.
I also have a '79 90zz with engine parts missing, I think clutch, generator etc. Not sure exactly. Maybe I could post up some photo's of what I do have, and perhaps you would be kind enough to let me know if you have what I need.
I'm afraid I don't have any OHV parts now. Used to when I had a C100 and C114.
I also don't have any 6V 90 parts, only 12V.
-
- Posts: 154
- Joined: Thu May 07, 2009 7:30 am
- Rides:: Hondas, lots of them
Re: Engine Parts
I'm not sure I'll have to look.yellasei wrote:do you have a piston from a 50zz?? i need one and it does'nt matter on the condition, for a template to machine a 70 piston to match my 50 head.
When I've done this in the past (don't really like doing it) I've just machined the piston straight across until it fits inside the head.
-
- Posts: 154
- Joined: Thu May 07, 2009 7:30 am
- Rides:: Hondas, lots of them
Re: Engine Parts
I have some 12V heads, some plain bearing and some ball bearing. They are in various stages of modification, porting, new valve guides etc.CeeGee wrote:Do you have a decent head for an '86 12V cub going? If so, how much do you want for it?
- yellasei
- Posts: 155
- Joined: Mon Jun 22, 2009 5:17 pm
- Rides:: nowt at the mo!!
- Location: birkdale, southport
Re: Engine Parts
if you do have a piston mate, can you let me know. thanks