Reproduction legshields.

A place for Monkey Bike and Mini Bike (including Grom/MSX) enthusiasts. This will be moderated in accordance with C90Club rules. Welcome!
Post Reply
Morocco
Posts: 10
Joined: Wed Feb 24, 2021 9:47 pm
Rides:: Honda C50

Reproduction legshields.

Post by Morocco » Wed Aug 10, 2022 3:57 pm

Hello All,

I'm considering purchasing new reproduction legshields for my 1977 6V C50 restoration. Do they fit well or is it a bad idea? My original legshields are in reasonably good condition, but have some age related scuffs.

I would appreciate your recommendations, should I stick with the original ones or fit reproduction legshields?.

Many thanks
Mark.

User avatar
bikerbaker
Posts: 2810
Joined: Thu Nov 07, 2013 2:35 pm
Rides:: 1990 C90, 2016 Kayak 110, Riders Cub, 2xSV650, BMW F800GT, Buell XB12R CT90/110
Location: Rochford Essex

Re: Reproduction legshields.

Post by bikerbaker » Wed Aug 10, 2022 4:54 pm

IMHO repro legshields have to be persuaded to fit properly and they are usually too white and brittle.

As with all aftermarket stuff there are some quite good replicas out there, I picked up a set of C90ZZ shields that were both flexible and off white. These were marked up as CM90 by the vendors OOH Thailand.

One of the problems with eBay listings, the vendors take a punt at what they think stuff will fit. :D David Silver list shields for a 1977 C50 but are out of stock at the moment, hopefully not too long a wait.

Depends on how far you're taking your restoration really. If it was me I'd clean up my originals and store them, fit a set of aftermarkets if the bike will be used.

Tewy
Posts: 134
Joined: Wed Feb 23, 2022 6:47 pm
Rides:: Honda C90MG

Re: Reproduction legshields.

Post by Tewy » Wed Aug 10, 2022 5:39 pm

bikerbaker wrote:
Wed Aug 10, 2022 4:54 pm
IMHO repro legshields have to be persuaded to fit properly and they are usually too white and brittle.

As with all aftermarket stuff there are some quite good replicas out there, I picked up a set of C90ZZ shields that were both flexible and off white. These were marked up as CM90 by the vendors OOH Thailand.

One of the problems with eBay listings, the vendors take a punt at what they think stuff will fit. :D David Silver list shields for a 1977 C50 but are out of stock at the moment, hopefully not too long a wait.

Depends on how far you're taking your restoration really. If it was me I'd clean up my originals and store them, fit a set of aftermarkets if the bike will be used.
Morocco wrote:
Wed Aug 10, 2022 3:57 pm
Hello All,

I'm considering purchasing new reproduction legshields for my 1977 6V C50 restoration. Do they fit well or is it a bad idea? My original legshields are in reasonably good condition, but have some age related scuffs.

I would appreciate your recommendations, should I stick with the original ones or fit reproduction legshields?.

Many thanks
Mark.
Just bought one for a restoration off eBay and the seller was louisedolla and cost just over £25 and it fitted really well

Morocco
Posts: 10
Joined: Wed Feb 24, 2021 9:47 pm
Rides:: Honda C50

Re: Reproduction legshields.

Post by Morocco » Wed Aug 10, 2022 8:42 pm

That's brilliant I'll wait until Dave Silver has them back in stock, and I agree that storing the original shields makes sense, I'd hate to wreck them as I will use the bike once finished.

Many thanks
Mark.

User avatar
Capitano
Posts: 5757
Joined: Wed Oct 27, 2010 8:05 pm
Rides:: '92 C90, '97 Divvy 6, 36V home-built e-bike
Location: West Sussex
Contact:

Re: Reproduction legshields.

Post by Capitano » Wed Aug 10, 2022 9:20 pm

I have what appears to be a very cheap set of aftermarket legshields on my '92 electric start C90.

They are very bright white, and obviously modified for the starter motor by the Cub's previous owner, I suspect using a breadknife.

Even though mine's a more modern Cub with, in theory, many more spares available used, I've never turned up a decent set of original e/s legshields in 8 years + of ownership.

Meanwhile, I've gotten very used to the bright white, so it'll probably stay as it is, anyway.

User avatar
bikerbaker
Posts: 2810
Joined: Thu Nov 07, 2013 2:35 pm
Rides:: 1990 C90, 2016 Kayak 110, Riders Cub, 2xSV650, BMW F800GT, Buell XB12R CT90/110
Location: Rochford Essex

Re: Reproduction legshields.

Post by bikerbaker » Wed Aug 10, 2022 9:39 pm

Capitano wrote:
Wed Aug 10, 2022 9:20 pm
I've never turned up a decent set of original e/s legshields in 8 years + of ownership.
eBay item 202578971703 :lol:

As far as aftermarket ES shields go I buy kickstart ones and cut my own hole (but not with a breadknife) I get a better fit that way. :D

User avatar
Capitano
Posts: 5757
Joined: Wed Oct 27, 2010 8:05 pm
Rides:: '92 C90, '97 Divvy 6, 36V home-built e-bike
Location: West Sussex
Contact:

Re: Reproduction legshields.

Post by Capitano » Wed Aug 10, 2022 9:51 pm

bikerbaker wrote:
Wed Aug 10, 2022 9:39 pm
Capitano wrote:
Wed Aug 10, 2022 9:20 pm
I've never turned up a decent set of original e/s legshields in 8 years + of ownership.
eBay item 202578971703 :lol:

As far as aftermarket ES shields go I buy kickstart ones and cut my own hole (but not with a breadknife) I get a better fit that way. :D
:lol:

I'll clarify, "turning up," as finding any decent ones for sale used at any of the many bike jumble meets I've been to, not brand new at well over a ton.

I have also "turned up, " sets at Ardingly and Kempton that looked as though they'd been fished out of a canal after 2 decades, also helping define the term, "decent." :lol:

My ideal encounter is to find some 30 year old ones that have been kept in a dry shed for 25 years, for £60 or preferably less.

8-)

Morocco
Posts: 10
Joined: Wed Feb 24, 2021 9:47 pm
Rides:: Honda C50

Re: Reproduction legshields.

Post by Morocco » Thu Aug 11, 2022 8:27 am

Many thanks!

User avatar
Jimo
Posts: 97
Joined: Mon May 23, 2016 7:51 pm
Rides:: Honda NH125 Lead, NH80 Lead, ’78 ST70, ‘94 Helix
Location: Fakenham, Norfolk

Re: Reproduction legshields.

Post by Jimo » Mon Jan 16, 2023 4:10 pm

Tends to lean towards buying New, not parts but whole bike if originality is one’s guide.

Jim

Post Reply