Hello All,
I have a ST70 6v and want to convert to the 12v to gain the benefits of the greater electrical power from the 12v.
Has anyone done this? Is it as simple as changing the whole wiring and 12v battery? I assume not...
Any info would be great, thank you.
Honda ST70 - 6v to 12v conversion
-
- Posts: 10
- Joined: Mon Sep 14, 2020 5:00 pm
- Rides:: Honda ST70
-
- Posts: 888
- Joined: Fri Mar 04, 2016 11:01 pm
- Rides:: C90 CBR600 PE175
- Location: Derbyshire-Leicestershire Border
Re: Honda ST70 - 6v to 12v conversion
Never done it but
No you wouldn't have to change the loom as a 12 volt system would only draw half the current for the same load ,so the wires would actually be less stressed.
You would need to fit a Reg/Rec off a later 12 volt C90 and add a couple of wires to make it work.
12 Volt battery obviously
Change all the bulbs and the horn to 12 Volt versions.
The hardest bit i'm aware of is finding a 12 lighting/charging coil that fits the back plate as the 12v c90 coil is a bit larger.
You could always have the original rewound for 12 volt operation.
No you wouldn't have to change the loom as a 12 volt system would only draw half the current for the same load ,so the wires would actually be less stressed.
You would need to fit a Reg/Rec off a later 12 volt C90 and add a couple of wires to make it work.
12 Volt battery obviously
Change all the bulbs and the horn to 12 Volt versions.
The hardest bit i'm aware of is finding a 12 lighting/charging coil that fits the back plate as the 12v c90 coil is a bit larger.
You could always have the original rewound for 12 volt operation.
-
- Posts: 593
- Joined: Tue Nov 20, 2012 1:16 am
- Rides:: Z50,cf70,msx and an auld german 1200gs
- Location: Belfast, Northern Ireland
Re: Honda ST70 - 6v to 12v conversion
Shire bikes used to supply them but unfortunately stopped so if you can find a stator plate and flywheel from a jincheng (easy rider) monkey m50 or dax dx90 engine .loadedtoad wrote: ↑Fri May 21, 2021 8:37 pm
The hardest bit i'm aware of is finding a 12 lighting/charging coil that fits the back plate as the 12v c90 coil is a bit larger.
These are a 6v style with 12v electrics suitable for the honda long crank with previously had advance and retard at the points area.
Iirc you'll need a slightly bigger 12v flywheel cover also as the your original one is too shallow to clear the bigger flywheel.
Alternatively I've seen bits from Thailand and the states about conversion kits, Beatrice cycles or doctor atv (dratv).
With cg cells being a previous jincheng importers they might have parts available.