Page 1 of 2

z50a project

Posted: Fri Aug 03, 2018 3:14 pm
by upnorth62
I spent almost a year looking for a z50a frame , then I get 2 at the same time with big box of bits.The frames are k1 ,k2. The bonus is both frames will come with nova paperwork. so should help with registration(theoretically ..lol)
Once paperwork has arrived ill offer the other frame for sale .

Im keen on keeping the k2 frame ill most likely put the c90 /110 engine I originally built for the crf50.in it. Hopefully ill do yellow/white spray job, with a few modern mods :D

Re: z50a project

Posted: Sat Aug 04, 2018 10:36 am
by Newtsalad
Well it's a start! :D

Re: z50a project

Posted: Sat Aug 04, 2018 5:29 pm
by upnorth62
Thanks for the boost Newt . :D
Ive nipped out today and bought a few primer rattles cans,Sorry to sound cynical but dont want to get carried away just yet ,until paperwork comes ( my ebay watch list is full of goodies waiting to be bought).got the frames from Huggyspeedshop , he always got tons of import parts /bikes for sale in the shop and/or ebay. Hes worth checking out ;)

Re: z50a project

Posted: Sat Aug 04, 2018 7:10 pm
by steveST100
This is how my 1970 Z88K1 started out.

Image

Was fitted with a ST70 engine bored to 88cc.

Image

Image

Yes the winky tinkers did work,bike was called area 51 as the backlight mount came from Roswell in the usa.
Forks and wheels are a mix of JC M50 and Honda.

steve g

Re: z50a project

Posted: Sun Aug 05, 2018 7:02 pm
by upnorth62
Nice pics Steve. looking at the metro in background im guessing pic taken late 80s early 90s?

I got 2 tanks with my box of bits, both are salvageable , the blue tank looking the better of the two. its in pretty good shape for a 50 year old tank ,but has suffered a split around the petrol tap thread ,and has had a small repair in corner . Shall I attempt a thin weld around the thread or cut out a piece as shown with marker and replace ? Thoughts ,suggestions welcomed. ;)

Re: z50a project

Posted: Sun Aug 05, 2018 7:45 pm
by steveST100
upnorth62 wrote:
Sun Aug 05, 2018 7:02 pm
Nice pics Steve. looking at the metro in background im guessing pic taken late 80s early 90s?
2003 and the other ones built up are 2004.

Image

steve g

Re: z50a project

Posted: Sun Aug 05, 2018 9:06 pm
by upnorth62
Ooops im just just a few years out then . :) :)

Re: z50a project

Posted: Mon Sep 24, 2018 8:34 pm
by upnorth62
Got the NOVA number though last week so the builds a go.Quick mock up today ,to see what does and doesn't fit , the rear caliper fits on caliper mount bracket , but doesn't sit straight on the disc. :cry: Now I understand why there was no returns on this when I bought it . :D Easily fixed ill re-drill and tap another mount hole .Rear master cyl bracket sits sweet on the engine case but the master cyl is fouled by the frame , nothing a little spacing cant sort out ;) I need some wheels :D

Bike stand provided and sponsored by B&Q

Re: z50a project

Posted: Sat Oct 27, 2018 7:27 pm
by upnorth62
squeezed a 130 rear tyre in there . but had to space out the wheel from hub. Im fairly sure ooracing do a spacing kit ;)
Most likely taking a break from it now . once I start I cant leave it alone till its finished ,and whole idea was to do a project as part of my pre retirement plan :)

For some reason cant switch the pic round ,its right way up before loading but upside down on forum . :oops:
Help from admin appreciated .

Re: z50a project

Posted: Thu Nov 15, 2018 8:23 pm
by upnorth62
Yes I know I said I would leave it alone for a while but couldn't help myself.
Cut the 180 degree bend in half today (38MM PIPE ) and fitted a nice T piece I bought of the bay , thought id go for a twin pipe :) ;)