Some of the 3 and 4 spoke wheels i have for some of the bikes i'm building.
![Image](https://imagizer.imageshack.com/v2/640x480q90/923/bpGOqF.jpg)
![Image](https://imagizer.imageshack.com/v2/640x480q90/924/sqfiNc.jpg)
4 spoke wheels.
4 spoke front.
The 4 spoke was used on the ST50/70 in both 6v and 12v and the CF50/70 only in 6v.
Brake side,note the plate is on the left side and has screw on speedo cable.
![Image](https://imagizer.imageshack.com/v2/640x480q90/924/TH39bF.jpg)
![Image](https://imagizer.imageshack.com/v2/640x480q90/924/2FR1AI.jpg)
Inside of hub and brake plate with the speedo drive in place.
Note upright tabs on the drive and slots in the hub.
![Image](https://imagizer.imageshack.com/v2/640x480q90/923/P26qkV.jpg)
Speedo drive.
![Image](https://imagizer.imageshack.com/v2/640x480q90/924/xR0cLD.jpg)
4 spoke rear.
Brake side.
![Image](https://imagizer.imageshack.com/v2/640x480q90/924/TsfZYs.jpg)
Inside of hub with brake plate.
![Image](https://imagizer.imageshack.com/v2/640x480q90/922/dd6PBH.jpg)
Sprocket side.
Crush drive rubbers and rear sprocket removed.
![Image](https://imagizer.imageshack.com/v2/640x480q90/922/lLzyVe.jpg)
Seal and spacer and you can see the groove for the C-clip that holds the rear sprocket on.
![Image](https://imagizer.imageshack.com/v2/640x480q90/922/oTPQ6L.jpg)
steve g