Anglesey prep
-
- Posts: 1288
- Joined: Thu May 27, 2010 2:47 pm
- Rides:: several honda c90's c70 and c50, lambretta li special puch and a honda cbf
- Location: sheffield
Anglesey prep
Anyone started their prep work for Anglesey yet ?,not long now and looking forward to this one
-
- Posts: 16
- Joined: Wed Feb 01, 2017 10:50 am
- Rides:: ZX9R, RD500LC, RG250III, RS125SP, WR450F, TC250, REV3 250 and 2 Cubs!
Re: Anglesey prep
I've started thinking about dragging the Plop out from the back of the garage so that's still a start, right?
-
- Posts: 1288
- Joined: Thu May 27, 2010 2:47 pm
- Rides:: several honda c90's c70 and c50, lambretta li special puch and a honda cbf
- Location: sheffield
Re: Anglesey prep
New set of second hand leg shields for us,and a wash
-
- Posts: 16
- Joined: Wed Feb 01, 2017 10:50 am
- Rides:: ZX9R, RD500LC, RG250III, RS125SP, WR450F, TC250, REV3 250 and 2 Cubs!
- Ventura
- Posts: 621
- Joined: Thu Nov 24, 2011 8:46 pm
- Rides:: '91 C90, '73 ST70 & Z50, '76 TL125, '80 Bultaco 250, '16 Yam XSR900,
- Location: Merseyside
Re: Anglesey prep
Rolled mine out the shed today.
Thought I'd overhaul the cyl head. Found Im now needing a new inlet valve, cam chain and camshaft drive wheel.
Also stripped the spark plug thread so helicoil kit is on the way!!
A bit more than the two hour job I'd reckoned on!
I'll move onto the wheels/brakes tomorrow I think......
V.
Thought I'd overhaul the cyl head. Found Im now needing a new inlet valve, cam chain and camshaft drive wheel.
Also stripped the spark plug thread so helicoil kit is on the way!!
A bit more than the two hour job I'd reckoned on!
I'll move onto the wheels/brakes tomorrow I think......
V.