Page 1 of 4

plop project

Posted: Sun Jan 15, 2017 5:28 pm
by fazey
From a box of bits i'm pretty happy with the way this is coming on.
Just need to come down that reserve list now.

Image

Re: plop project

Posted: Sun Jan 15, 2017 5:35 pm
by fazey
Need a new carb.
anyone tell me if these are any good ?
http://www.ebay.co.uk/itm/New-Honda-C90 ... SwxCxT6cim

Re: plop project

Posted: Sun Jan 15, 2017 6:15 pm
by Alan CF
Should be ok, But i think your loosing 1mm on the Ventura.

C90 Class
1. Max 90cc. No big-bore kits
2. Standard Keihin PB type carb (max 15mm slide / 19mm exit) and standard Honda C90/C70 inlet manifold only.
3. Standard design 2 valve single OHC cyl head only
4. 3-Speed semi-auto clutch only

Re: plop project

Posted: Sun Jan 15, 2017 8:48 pm
by fazey
did notice its 18mm and not 19mm but it is origanal and that is what the rules states. I have 3 carbs here but they all have bits missing and in a state i wouldnt want to use.

Re: plop project

Posted: Sun Jan 15, 2017 8:50 pm
by fazey
By the way will be in the open class.

Re: plop project

Posted: Sun Jan 22, 2017 12:10 pm
by fazey
Where to start. best get looking for some information on this.
I know there is a needle circlip missing plus the cable stop above the slide.
Guy who sold me these took them all to bits and this is how i got them plus there is 70 and 90 bits mixed in. headache time.

Image

Re: plop project

Posted: Mon Jan 30, 2017 8:03 pm
by fazey
Managed to get the carb sorted. So had a go at the back brake convertion, didnt turn out to bad.
Not quite finished yet but its on and working.
Please let me know if i'm missing something..


Image

Re: plop project

Posted: Mon Jan 30, 2017 8:26 pm
by culfy
Looks good Fazey,what exhaust you going to use ?

Re: plop project

Posted: Mon Jan 30, 2017 9:28 pm
by fazey
Not got an exhaust yet. need to get hold to something. would like a race exhaust but we dont have a big budget.

Re: plop project

Posted: Mon Jan 30, 2017 9:56 pm
by Ventura
fazey wrote: Not quite finished yet but its on and working.
Please let me know if i'm missing something..
Lookin' good so far Fazey!
You may need to brace the anchor point a bit to stop it flexing under full braking load.

V.