Hi can anyone help
removed what thought was the oil sump bolt on my honda wave only to see a spring and long bolt drop out. seems it's the cam tensioner bolt / rod.
I have put it back in but worried to start engine in case I cause damage. would it be ok to start her up ?
honda wave cam tensioner rod
-
- Posts: 3
- Joined: Fri Jan 01, 2016 8:27 pm
- Rides:: honda wave , honda SH300
- Location: Glasgow
- wightegi
- Posts: 9719
- Joined: Tue Sep 01, 2009 7:23 pm
- Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
- Location: Isle of Wight
Re: honda wave cam tensioner rod
It will rattle for a while ,start up do not rev and wait for the oil to get round to it and all will be good
-
- Posts: 3
- Joined: Fri Jan 01, 2016 8:27 pm
- Rides:: honda wave , honda SH300
- Location: Glasgow
Re: honda wave cam tensioner rod
many thanks for your reply wightegi, will try it out
cheers
cheers
-
- Posts: 3
- Joined: Fri Jan 01, 2016 8:27 pm
- Rides:: honda wave , honda SH300
- Location: Glasgow
Re: honda wave cam tensioner rod
just as you said, took her for a run today and all was well
thanks again
thanks again