CG125 stuff.

Anything else ya ride!
Post Reply
stevew
Posts: 3467
Joined: Sun Jun 06, 2010 6:19 pm
Rides:: MaxSym 400i (2013) Wave110i (2014)
Location: Orpington, UK

CG125 stuff.

Post by stevew » Mon Aug 31, 2015 3:54 pm

Moving this too a more relevant place on the forum ;)

Racks Hammerited, black two coats. Gaiters fitted. Side stand fitted. Nice 8x6 (don't start on the "legality" bit) number plate fitted. Mat's chain guard fitted and a new one ordered for Mat's bike. Bike fully loaded for a test run (but not today, unless it stops raining) Oil will be changed just before i leave. New DID h/d chain and JT sprockets on order along with hand guards. Gonna be the ultimate "adventure bike" and will be parked beside all the Beemer GSs to create some real bike interest !!

CG now ready for Germany and the Diesel bike rally the weekend after next. I know it's a long time yet but it was wet and miserable today so i though i'd do a dummy load up. Test ride tomorrow :)

Image

stevew
Posts: 3467
Joined: Sun Jun 06, 2010 6:19 pm
Rides:: MaxSym 400i (2013) Wave110i (2014)
Location: Orpington, UK

Re: CG125 stuff.

Post by stevew » Mon Aug 31, 2015 4:29 pm

Image
Image

d23mcd
Posts: 92
Joined: Mon Dec 21, 2009 6:18 pm
Rides:: C90, C125, MZ ETZ 250. MZ ES150,MZ TS150, CBF600
Location: cardiff

Re: CG125 stuff.

Post by d23mcd » Mon Aug 31, 2015 4:54 pm

Looks good I really like that model cg, went to see a V reg not long ago but was a bit too tatty.Would like to go away for a few nights Camping on bike (2weeks off work next month) Don't fancy taking my cub away fully loaded, I don't feel confident with the slower speed and extra weight. God I wish I hadn't sold my MZ. Look forward to see how your set run goes. Goodluck.

User avatar
Diesel Dave
Posts: 11055
Joined: Tue Oct 13, 2009 7:25 pm
Rides:: 1965 Enfield Diesel, 2017 Sterling, Modenas Kriss and CT200 - the only Cub left
Location: Brentwood, Essex

Re: CG125 stuff.

Post by Diesel Dave » Mon Aug 31, 2015 5:17 pm

Ah good an MZ man - any experience of the 150's?

d23mcd
Posts: 92
Joined: Mon Dec 21, 2009 6:18 pm
Rides:: C90, C125, MZ ETZ 250. MZ ES150,MZ TS150, CBF600
Location: cardiff

Re: CG125 stuff.

Post by d23mcd » Mon Aug 31, 2015 6:20 pm

Nah I had a ETZ 250.Was good fun, thinking of getting a cg or similar just for work, don't like using the 90 to work too many bike theives about and iv spent a lot of time and money getting it how it is now.

stevew
Posts: 3467
Joined: Sun Jun 06, 2010 6:19 pm
Rides:: MaxSym 400i (2013) Wave110i (2014)
Location: Orpington, UK

Re: CG125 stuff.

Post by stevew » Mon Aug 31, 2015 7:01 pm

Diesel Dave wrote:Ah good an MZ man - any experience of the 150's?
I had a 150 about 35 years ago and spent a year doing the courier circuit .............if my memory serves me well it was super reliable and never let me down. Even ran when most of the rollers had vanished from the chain, just the pins left :o That's the problem with me & fully enclosed chains :roll:

User avatar
r80rob
Posts: 1642
Joined: Sat Jul 16, 2011 7:17 pm
Rides:: 73 c70 with c90 110, 72 MZ es250 and a r80!
Location: Minster on Sea, kent

Re: CG125 stuff.

Post by r80rob » Tue Sep 01, 2015 8:51 pm

Those smaller panniers look good , hopefully it's all still solid loaded up. Come and find me when your back and I'll sort out the extra brackets.

Looking at the pictures they look fairly straight and both seem inline , not bad considering we didn't measure anything and used a spirit level once :lol:

User avatar
Capitano
Posts: 5757
Joined: Wed Oct 27, 2010 8:05 pm
Rides:: '92 C90, '97 Divvy 6, 36V home-built e-bike
Location: West Sussex
Contact:

Re: CG125 stuff.

Post by Capitano » Tue Sep 01, 2015 11:16 pm

Diesel Dave wrote:Ah good an MZ man - any experience of the 150's?
I had a 150 many many moons ago.

I racked up a good few miles on it (40k+) and loved it.

I wouldn't have one now, though. Back then they were cheap as chips and a briliant hack. Nowadays they are more for the committed enthusiast. :)

Image

stevew
Posts: 3467
Joined: Sun Jun 06, 2010 6:19 pm
Rides:: MaxSym 400i (2013) Wave110i (2014)
Location: Orpington, UK

Re: CG125 stuff.

Post by stevew » Tue Sep 01, 2015 11:27 pm

That's what mine looked like too ;)

stevew
Posts: 3467
Joined: Sun Jun 06, 2010 6:19 pm
Rides:: MaxSym 400i (2013) Wave110i (2014)
Location: Orpington, UK

Re: CG125 stuff.

Post by stevew » Tue Sep 01, 2015 11:33 pm

d23mcd wrote:Looks good I really like that model cg, Look forward to see how your set run goes. Goodluck.
Did a test run today, about 80 miles, fully loaded as in the piccies earlier.
Felt fine, handled well, and still hit 70 on the A2 being sucked along with all the other traffic !!
Normal max is 60 though :P
Rob's rack did the job well too, nice and solid, so i have confidence now for Germany.

Post Reply