Hi guys thanks for the add..

[Scmoto85]

Hi there guys and girls,

I’m new to the forum so hello to everyone. I’m in the middle of re-commissioning a 1999 c90 cub for a pal and first thing I found was lack of compression down to a bent exhaust valve which has all been replaced and engine is back together. Just a quick one but does anybody on here have access to the torque settings for the cylinder head etc etc? I’d just like to double check everything before letting my pal out on it.. much appreciated

Scott.

[bikerbaker]

Torque (2).jpg

These are from the Honda workshop manual for a C90E (1985ish) but should be fine for all 12v bikes.

All fairly generic, the manual is downloadable following the following thread.
viewtopic.php?f=44&t=34257

[Capitano]

Welcome to c90club!

I was going to suggest repeating the question in one of the technical sections, but bikerbaker has already provided the info.

[Scmoto85]

Thank you guys you’ve really helped out.
Little bike is running lovely, just awaiting replacement clutch now.

Awesome group. Thank you very much