Hi all
I have purchased a front rack complete with fitting bolts but the two bolts that bolt onto the front forks are too big. (8mm) could anyone please inform me of the correct size required and are the holes in the forks threaded ? Thank you
Help please front rack
-
- Posts: 19
- Joined: Fri Jan 25, 2019 7:16 pm
- Rides:: 1990 Honda c90. Yamaha fizzy Kawasaki KE 125
- Location: Shropshire
- wightegi
- Posts: 9719
- Joined: Tue Sep 01, 2009 7:23 pm
- Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
- Location: Isle of Wight
Re: Help please front rack
They should be M6
-
- Posts: 19
- Joined: Fri Jan 25, 2019 7:16 pm
- Rides:: 1990 Honda c90. Yamaha fizzy Kawasaki KE 125
- Location: Shropshire
Re: Help please front rack
Hi wightgi
Thank you for your prompt reply. Do you know if the forks are threaded or will I need m6 bolts with nuts?
Thank you for your prompt reply. Do you know if the forks are threaded or will I need m6 bolts with nuts?
- steveST100
- Posts: 1889
- Joined: Tue Oct 25, 2011 3:04 pm
- Rides:: 1983 C50LAC 1976 ST100 1980 ST70
- Location: Clitheroe Lancs
Re: Help please front rack
Should be threaded, but may have a rubber/plastic plug in there that will need removing first.
This is the front rack for a presscub,this has two legs not the one that your rack should have,top one on this is the same as yours(m6) but this has a m8 bottom one as well.
steve g
-
- Posts: 19
- Joined: Fri Jan 25, 2019 7:16 pm
- Rides:: 1990 Honda c90. Yamaha fizzy Kawasaki KE 125
- Location: Shropshire
Re: Help please front rack
Hi Steve
Brilliant. Thank you for the advice. I’ll look for some m6 bolts and put them in.
Brilliant. Thank you for the advice. I’ll look for some m6 bolts and put them in.