Hi everyone, nice to be hear on the c90 club forum. Although i ride a vespa small frame and a c50.
Cheers!!
Al.
Hi there! new to forum
-
- Posts: 3
- Joined: Fri Oct 15, 2010 9:29 pm
- Rides:: small frame vespa, c50
- Location: Perthshire
- CeeGee
- Posts: 1378
- Joined: Tue May 05, 2009 12:03 am
- Rides:: BMW R80 Airhead, 1987 HondaC90, 1981 Suzuki GSX1100 & Occasional Sheep
- Location: North Beds.
- Contact:
Re: Hi there! new to forum
Welcome to the board!
-
- Posts: 102
- Joined: Tue Aug 17, 2010 6:36 pm
- Rides:: 2001 CBR1100XX, 1985 C90
- Location: Hampshire
Re: Hi there! new to forum
Ah, herro!
Enjoy the boards, and allow me to save you some time by answering some of the most common questions:
Not a lot beats a well serviced standard setup... About 50-55mph would be right... Cubshocks, cubshocks, cubshocks... Yes, but you'd need an oil cooler.... Ride at 40-45MPH and you won't have any more trouble... John Oldfield or try eBay... Watch your oil temp... SLOW DOWN THEN!! Conti go... Snickers bars usually but I'll take a jellied sheepdog if that's all you have... Post pics!
That about covers it. And I'm p0ng0.
Now just move reft a rittle.... that's right.. rittle bit more....
etc..
hic!
Enjoy the boards, and allow me to save you some time by answering some of the most common questions:
Not a lot beats a well serviced standard setup... About 50-55mph would be right... Cubshocks, cubshocks, cubshocks... Yes, but you'd need an oil cooler.... Ride at 40-45MPH and you won't have any more trouble... John Oldfield or try eBay... Watch your oil temp... SLOW DOWN THEN!! Conti go... Snickers bars usually but I'll take a jellied sheepdog if that's all you have... Post pics!
That about covers it. And I'm p0ng0.
Now just move reft a rittle.... that's right.. rittle bit more....
etc..
hic!
- Pjam
- SPAMMER!
- Posts: 9608
- Joined: Tue Nov 03, 2009 11:47 am
- Rides:: C90, C70c, CB500, ANF125, A100 Bitsa
- Location: London
Re: Hi there! new to forum
I like the way you've taken to the board pOngOp0ng0 wrote:Ah, herro!
hic!
Hi SF aand welcome to the club
- Rickster
- Posts: 131
- Joined: Tue Jul 20, 2010 8:52 pm
- Rides:: MZ ETZ250, Vespa PX200E, Piaggio Typhoon 125, Puch MS50D, Yamaha Townmate T80
- Location: Torbay
Re: Hi there! new to forum
Hi and welcome. I have owned a Vespa smallframe and still have a PX200 9old mods dies hard)
I have always liked stepthroughs and although I dont own a cub (yet.....but I hope to make room for one in the future) I have a shaft drive Yamaha Townmate 80.
I have always liked stepthroughs and although I dont own a cub (yet.....but I hope to make room for one in the future) I have a shaft drive Yamaha Townmate 80.
- herrod
- Posts: 1772
- Joined: Fri Jun 19, 2009 6:14 pm
- Rides:: C50 cd90z 600 Rotax flat tracker.
- Location: Barnsley
Re: Hi there! new to forum
if you get a c90 you probly wont change another calbe in your life,i know i had enough of that with my 3 yr vespa experience .
- Rickster
- Posts: 131
- Joined: Tue Jul 20, 2010 8:52 pm
- Rides:: MZ ETZ250, Vespa PX200E, Piaggio Typhoon 125, Puch MS50D, Yamaha Townmate T80
- Location: Torbay
Re: Hi there! new to forum
I know what you mean. Trying to get one through the Vespa frame in the pouring rain on the way to Great Yarmouth still gives me nightmares. Smallframe will tell you it could be more difficult on his as you cant take the headset off.herrod wrote:if you get a c90 you probly wont change another calbe in your life,i know i had enough of that with my 3 yr vespa experience .