Footrests & sidestand for C90 electric start

[Devon general andy]

The electric start ones are good.
That's the thing to do..... buy the best condition one you can find or afford or both.

Good electrics and bigger capacity 5ah battery
Instead of the 4ah in the kick only ones.
Most parts are interchangeable except:-
Footpeg bar,
Left side engine cover,
Right hand side battery cover,
Battery cradle and bits,
The kick legshields can be 'doctored' to accommodate the starter lump.
Obviously some extra wiring in loom.
At the end of the day..... they will kick and start with a flat battery.
Cheers Andy.


If you can't find an 'M' footpeg bar then it is possible to extend the left side with a section piece.
Cheers Andy.

[ally]

before you go chasing is the correct part number? 50610-GN8-620

if so this site says they have stock

https://www-piese--originale-net.transl ... r_pto=wapp

[Bobby90]

Thanks Ally, looks like that is the bar that is already on the bike which does not have the side stand tab.

I think I need this part 50610GK4620
Number 8 from here with a picture https://www.fowlersparts.co.uk/parts/47 ... ange-pedal

Loving how people are trying to help on here, thank you

Also looking for the front chrome carrier and centre carrier, looks like I joined the party when items are no longer available I don’t mind pay a little over the odds for parts or p\X.

[Bobby90]

It would be great to just be able to buy the whole assembly and bolt it on, more than happy to pay £100/£150? I just like the sidestand option, centre stand makes me think it will fall over

[ally]

my bad, I don't think I read the thread properly

if you are on facebook there is a guy breaking c90's, he's from telford, that's all I can tell you at present, george was searching for frames and swingarms for my rebuild project but he's away enjoying himself on the club run...

I'll keep searching

[Devon general andy]

Quite a while back now, there was a member on here enquiring about footpeg bars and I put on here all the measuresments of the two types.... bolt holes to bends etc.
I can't seem to find my posts or the thread. I can't remember which member it was either?

[ally]

this?

viewtopic.php?f=21&t=37490&p=330202&hil ... st#p330202

just a maybe:

https://beezdeals.com/product/genuine-s ... 2018-2019/

perhaps someone could measure up a c125?

[ally]

its chrome but

https://m73223.wixsite.com/cub-racing/p ... art-models

[Bobby90]

Wow, you have been busy, ABR is closed unfortunately or would have been a perfect solution, they did get back to me though.

[Devon general andy]

Well done ally, for finding that thread!
It's funny how similar queries crop up over time.
Thanks again for your time and trouble.
Andy.