Page 1 of 1

Few bits wanted for 1984 C70

Posted: Tue Jan 26, 2021 9:26 am
by Lee77uk
After a few parts/numbers...

The bolt circled.. but a short one that doesn’t stick out.. should I choose not to fit a front rack.

An indicator switch.

The rubber seal that goes around the clock.. seems to have become loose or stretched.

Also is anyone able to identify this bike on David Silvers/CMS spares website?

Thanks

Image

Image

Image

Image

Image

Re: Few bits wanted for 1984 C70

Posted: Tue Jan 26, 2021 12:06 pm
by wightegi
The bolt is just an M8 bolt ,use a bit of M8 studding and a chrome caped nut from Toolstation .

Plus lots of rubber trim available on eBay. as for the switch may be a new set ?

Re: Few bits wanted for 1984 C70

Posted: Tue Jan 26, 2021 12:23 pm
by Lee77uk
Good idea..

Re: Few bits wanted for 1984 C70

Posted: Wed Jan 27, 2021 8:26 am
by Harps18TV
You may be able to take the switch to bits & repair it possibly.

Re: Few bits wanted for 1984 C70

Posted: Thu Jan 28, 2021 9:45 am
by Lee77uk
I believe the switch is working, it’s just missing the control knob thing.. looks like I can get one new from CMS for £7.50 but postage is €15

Re: Few bits wanted for 1984 C70

Posted: Thu Jan 28, 2021 11:35 am
by wightegi
Lee77uk wrote:
Thu Jan 28, 2021 9:45 am
I believe the switch is working, it’s just missing the control knob thing.. looks like I can get one new from CMS for £7.50 but postage is €15
If you can get a part number try David Silver`s or any Honda dealer .

Re: Few bits wanted for 1984 C70

Posted: Thu Jan 28, 2021 1:00 pm
by kayz1
Lee77uk wrote:
Thu Jan 28, 2021 9:45 am
I believe the switch is working, it’s just missing the control knob thing.. looks like I can get one new from CMS for £7.50 but postage is €15

Don't forget the Vat both ends so that's two lots of VatPlus customers and handling :( ::: make one out of a bit of plastic...
Getting ripped off again in this country...and new that lot want our Jabs::: :lol: