Has anyone got the engine bolts forvthe above?
All the ones on ebay are for the later models
Tia
Engine bolts 1972 c90 6v
-
- Posts: 29
- Joined: Sat Feb 22, 2020 2:42 pm
- Rides:: Too many !!!
- Location: Leyland, lancs
-
- Posts: 678
- Joined: Sat Mar 02, 2013 10:32 pm
- Rides:: 1966 S90 1998 royal enfield 350
- Location: willenhall nr Walsall
- Contact:
Re: Engine bolts 1972 c90 6v
Ay up Brian,measured mine at 2 off 120mm and 125mm end to end total length.
-
- Posts: 29
- Joined: Sat Feb 22, 2020 2:42 pm
- Rides:: Too many !!!
- Location: Leyland, lancs
Re: Engine bolts 1972 c90 6v
Been doing loads of research and it looks like the bolts are discontinued
-
- Posts: 678
- Joined: Sat Mar 02, 2013 10:32 pm
- Rides:: 1966 S90 1998 royal enfield 350
- Location: willenhall nr Walsall
- Contact:
Re: Engine bolts 1972 c90 6v
Looking at getting some in stainless @ 0.75 pitch so be a few days yet...
-
- Posts: 678
- Joined: Sat Mar 02, 2013 10:32 pm
- Rides:: 1966 S90 1998 royal enfield 350
- Location: willenhall nr Walsall
- Contact:
Re: Engine bolts 1972 c90 6v
Right......l can get them in stainless or HT,in fine thread or super fine thread BUT only in a minimum order of a box full l bought a stainless m8 standard thread 125mm length doubt if anyone can spot the difference.
Andy.
Andy.