C90Club.co.uk

HI
wind has just blown my bike over
Need a new screen for c90 1999 rickman
HELP Dave Contact 07766831129

You could always cut a new one. Tape up the old one and use it as a template. Buy a small sheet of Lexan, cuts quite easily.

I used a jigsaw with a grit blade designed for ceramic tiles then finished up the edges with sandpaper. The curvature can be achieved with a bit of heat from a hot air gun or similar. Worked for me!

thanks bikerbaker
Iwas looking into diy
what is lexan re perspex
Dave

Lexan is just one of the names of polycarbonate used for screens. I have in the past bought offcuts from a local display/signmaker company. A couple of years ago I was given an offcut of Lexan and managed to cut various screens of different sizes for the Rickman fairing. I think this was 4mm which to be honest is a bit over the top, 3mm would be better. Small sheets are available on eBay at quite reasonable prices.

Here' s some I made earlier.