6V engine cover

RE-OPENED :)
Post Reply
Plaggy
Posts: 2
Joined: Sat Jun 19, 2010 12:03 am
Rides:: ST70, CF70, CD175, TZR250, RD350LC11, VFR750FG.
Location: Near Sheffield.

6V engine cover

Post by Plaggy » Thu Jun 24, 2010 5:00 pm

Hello everybodypeeps,
My first post on here and I'm bieng cheeky n askin for summat!
I have a 6V C90 engine I want to fit in my 1971 ST70 but it's missing the flywheel/front sprocket cover. Anyone out there have a spare doing nothing?
Thanks all.
Top
pauluk

Re: 6V engine cover

Post by pauluk » Fri Jun 25, 2010 11:45 pm

6 volt c90 into a st70 ?? you sure it will go in?
Top
User avatar
matt.leese
Posts: 958
Joined: Sun Jul 05, 2009 8:51 pm
Rides:: 1995 red 107cc c90, 1979 blue c70 zz, 1985 c90 cub blue, 1971 c50, 1973 c70z2
Location: costa del barnsley, south yorkshire

Re: 6V engine cover

Post by matt.leese » Fri Jun 25, 2010 11:54 pm

it wont without chooping and fabricating the frame ;)
Top
Plaggy
Posts: 2
Joined: Sat Jun 19, 2010 12:03 am
Rides:: ST70, CF70, CD175, TZR250, RD350LC11, VFR750FG.
Location: Near Sheffield.

Re: 6V engine cover

Post by Plaggy » Sun Jun 27, 2010 11:10 am

I've not tried to fit it yet but I've been told it'll slot in no probs. The engine I have for the job has the points located behind the flywheel cos I was also told that the 6v engine with points located on the end of the cam would not fit without work. Could this be true? Does it make sense?
All early ST's and CF's are 6v and I think the only differences between these and 6v C70 engines are carb, inlett manifold and engine no.s!
So, anybody got a side cover for me please? Is the flywheel cover and sprockett cover separate or one piece? The one on the CF and ST are one piece and don't fit the 90 engine so... (could supply engine no.s if this helps identify which bike the engine came from and therefore which cover(s) I need.
Thanks in advance for any help.
Top
Post Reply

Return to “Wanted”