i have a early 6 volt bottom end with a custom 4 speed gearbox. same 1st and 4th is same as old 3rd. it is all down gears. it has been made with hoda gears etc
It will need a strip and clean as the engine droped a valve before it was removed. £50
also have a barral bored out to take a +1mm cd175 piston 53mm i think? comes with a new piston and rings barral has been used. it is a direct fit but you may need to mill the piston to drop the C/R. £15
early 6 volt 4 speed bottom end plus 100cc bore kit
-
- Posts: 54
- Joined: Mon Dec 20, 2010 10:24 pm
- Rides:: 12v roundheadlight 201cc 4valve
- Location: lincolnshire
- monkey
- Posts: 107
- Joined: Fri Oct 22, 2010 7:35 pm
- Rides:: c90, ktm 525
- Location: south wales
Re: early 6 volt 4 speed bottom end plus 100cc bore kit
Will they fit a 1971 model? if so can you post it and how much will it be? cheers
-
- Posts: 54
- Joined: Mon Dec 20, 2010 10:24 pm
- Rides:: 12v roundheadlight 201cc 4valve
- Location: lincolnshire
Re: early 6 volt 4 speed bottom end plus 100cc bore kit
hi i am not sure on what years it will fit.
but it is the 6 volt type with the points in the head.
I will post it will be about £15
but it is the 6 volt type with the points in the head.
I will post it will be about £15