Honda SuperCub C90G and T spares needed gone
Posted: Mon Sep 10, 2018 8:46 am
Hello again, I have found some more bits that need gone, prices will be symbolic and negotiable as I need them out of the way. Sold my daily C90s and I don't need these anymore:
Some bits have sold on the facebook page (big mistake in advertising there...) and these are:
- the 6V Rickman fairing
- Lifan stator + rotor
- front rim with spokes (left with a rear rim with spokes)
- both grab handles
What's left is:
- Almost complete seat (hinge assembly is incomplete, one tear on the side)
- 4 x shoe springs OEM new
- Pl, Silencer - 50385-GB4-000 - used part
- Upper handlebar cowl in used condition with one of the fixings damaged but still have the broken piece so could be glued?
- 2 x exhausts, one from a C90T, the other from a C50 Little Cub (50 won't fit a 90 without some mods)
- OEM new side stand bolt + nut + probably pattern spring.
- Pattern complete front wheel C90G type.
- 3 x bolt + nylock nuts + 2 x spacers for the Rickman rear carrier (the one with the side bag support) these fixings go on the indicator stem fixing location.
- 1 x JT front sprocket new 16T
- Some o-rings and 2 x valve stem seals for the C90G type engine (1986 - 1994?) + 2 gudgeon pin clips.
- Both caps for a C90MT E-Start LH engine cover. The one for the crank nut and the other one for the inspection (checking the flywheel markings for the T F marks) These are OEM new.
- 2 x? copper washers for the head stud top nut seal for the oil feed. New OEM
- 2 x valve stem seals for the C90T (1996-2002) New OEM
- 4 x rear shocks in Shuttle Blue.
- 1 x engine guard (this was received as a gift from Diesel Dave, so would accept just the postage fees for it... never fitted it so not sure how it fits).
- 4 x horns. One is pattern and works, not sure about the other 3. 2 of them might need tuning.
- C90G Square spaced indicators Rickman Faring + fixings. No clear screen with this one. Can be bought new. This one was never fitted so as new.
- Rear rim with spokes, cush drive rubbers
- 2 x mirror mounts (original risers) + 2 x LH threaded nuts + the 2 x rubber protectors that come over the nut and risers. These are all new OEM. So everything for the mirrors without the actual mirrors.
- 3 x ring sets, 3 x gudgeon pins, 3 x 2 gudgeon pin clips all new (pattern)
- 1 x ring set Original OEM, a complete lower dirtshield fixing set (long screw + spacer + washer all OEM new but not in their original wrappings), overflow or breather hose for the carb... not sure which one... probably breather. 1 magnetic sump plug and washer, 2 x in line fuel filters, 1 x set of cush drive rubbers, some front forks mounts, etc.
- 1 x brake shoes OEM new
- 1 x throttle cable used.
Feel free to ask anything. I'll take offers for all of these.
Thank you.
George M.
Some bits have sold on the facebook page (big mistake in advertising there...) and these are:
- the 6V Rickman fairing
- Lifan stator + rotor
- front rim with spokes (left with a rear rim with spokes)
- both grab handles
What's left is:
- Almost complete seat (hinge assembly is incomplete, one tear on the side)
- 4 x shoe springs OEM new
- Pl, Silencer - 50385-GB4-000 - used part
- Upper handlebar cowl in used condition with one of the fixings damaged but still have the broken piece so could be glued?
- 2 x exhausts, one from a C90T, the other from a C50 Little Cub (50 won't fit a 90 without some mods)
- OEM new side stand bolt + nut + probably pattern spring.
- Pattern complete front wheel C90G type.
- 3 x bolt + nylock nuts + 2 x spacers for the Rickman rear carrier (the one with the side bag support) these fixings go on the indicator stem fixing location.
- 1 x JT front sprocket new 16T
- Some o-rings and 2 x valve stem seals for the C90G type engine (1986 - 1994?) + 2 gudgeon pin clips.
- Both caps for a C90MT E-Start LH engine cover. The one for the crank nut and the other one for the inspection (checking the flywheel markings for the T F marks) These are OEM new.
- 2 x? copper washers for the head stud top nut seal for the oil feed. New OEM
- 2 x valve stem seals for the C90T (1996-2002) New OEM
- 4 x rear shocks in Shuttle Blue.
- 1 x engine guard (this was received as a gift from Diesel Dave, so would accept just the postage fees for it... never fitted it so not sure how it fits).
- 4 x horns. One is pattern and works, not sure about the other 3. 2 of them might need tuning.
- C90G Square spaced indicators Rickman Faring + fixings. No clear screen with this one. Can be bought new. This one was never fitted so as new.
- Rear rim with spokes, cush drive rubbers
- 2 x mirror mounts (original risers) + 2 x LH threaded nuts + the 2 x rubber protectors that come over the nut and risers. These are all new OEM. So everything for the mirrors without the actual mirrors.
- 3 x ring sets, 3 x gudgeon pins, 3 x 2 gudgeon pin clips all new (pattern)
- 1 x ring set Original OEM, a complete lower dirtshield fixing set (long screw + spacer + washer all OEM new but not in their original wrappings), overflow or breather hose for the carb... not sure which one... probably breather. 1 magnetic sump plug and washer, 2 x in line fuel filters, 1 x set of cush drive rubbers, some front forks mounts, etc.
- 1 x brake shoes OEM new
- 1 x throttle cable used.
Feel free to ask anything. I'll take offers for all of these.
Thank you.
George M.