12V Front carrier £21 posted!

[mjsteels]

Hi There, are you still making these? would like one- where do they mount to on the front?

Cheers

Matt

[Capitano]

Finally got around to cleaning mine up, painting it and fitting it.

Actually I'm quite impressed with myself, not leaving it to the day before I leave on a trip.




Thanks again, Buzz!

[shakeybiker]

Hi
Are you still selling these please?

Thankyou

[buzz500]

Have plans for more front carriers,spine racks and 6V pattern rear carriers,as these seem to be hard/expensive to find.Only thing against me at the moment is time.Will post when ready.
Buzz

[Moo.]

6V pattern rear carriers

[buzz500]

The rear carriers are slightly modified,you can actually lift the seat all the way up! Unlike most of the originals where the bar stops it.
Buzz

[Moo.]

The rear carriers are slightly modified,you can actually lift the seat all the way up! Unlike most of the originals where the bar stops it.
Buzz

Me want!

[krazy kev]

6V pattern rear carriers

could be a good seller. do you mean a rack for a solo or pillion seat set up.
i think both types will sell well.
mine is for a solo seat set up. it is actually a modified 6v type from a C50L

[buzz500]

Double seat,hinged at the rear,most oem ones dont allow the seat to lift up properly,I moved the bar back slightly so you can fill up etc,without holding the seat.
Buzz

[krazy kev]

when i had my ZZ70 i never had the problem as i made a rack in college but when i had my 70Z2 I did have the problem. what i done was bolt a length of 25 x 3mm steel bar to the ends of the side brackets to move the rack back a few inches and made some longer brackets that hold it to the rear mudguard.
had to be careful what i put in it as it was now further back