exhaust stud extraction - alloy head

Anything else ya ride!
barker
Posts: 3461
Joined: Sun Jun 06, 2010 8:38 am
Rides:: t80 honda90 nexus honda xr honda sh loncinyamaha vigaro 53suzukiaddress5
Location: west sussex

Re: exhaust stud extraction - alloy head

Post by barker » Fri Aug 10, 2018 10:11 pm

your making a good case for throwing the scooter away now
but I will try and drill one of the studs out first

barker
Posts: 3461
Joined: Sun Jun 06, 2010 8:38 am
Rides:: t80 honda90 nexus honda xr honda sh loncinyamaha vigaro 53suzukiaddress5
Location: west sussex

Re: exhaust stud extraction - alloy head

Post by barker » Sat Aug 11, 2018 8:02 am

Image
so far not a lot of progress

barker
Posts: 3461
Joined: Sun Jun 06, 2010 8:38 am
Rides:: t80 honda90 nexus honda xr honda sh loncinyamaha vigaro 53suzukiaddress5
Location: west sussex

Re: exhaust stud extraction - alloy head

Post by barker » Sat Aug 11, 2018 8:04 am

Image
work in progress

barker
Posts: 3461
Joined: Sun Jun 06, 2010 8:38 am
Rides:: t80 honda90 nexus honda xr honda sh loncinyamaha vigaro 53suzukiaddress5
Location: west sussex

Re: exhaust stud extraction - alloy head

Post by barker » Mon Aug 13, 2018 5:55 pm

Imagefree pictures hosting
spent all week heating studs up and spaying them with rust killer . the stud sticking up unscrewed the other one needed drilling out , I used a left handed drill bit , then a 4 inch nail to tap it round
any use putting copper grease on the new stud s

JOHNBOY
Posts: 1705
Joined: Sat Apr 13, 2013 2:03 pm
Rides:: HONDA SUZUKI

Re: exhaust stud extraction - alloy head

Post by JOHNBOY » Mon Aug 13, 2018 6:03 pm

yes plenty of copper grease on studs

barker
Posts: 3461
Joined: Sun Jun 06, 2010 8:38 am
Rides:: t80 honda90 nexus honda xr honda sh loncinyamaha vigaro 53suzukiaddress5
Location: west sussex

Re: exhaust stud extraction - alloy head

Post by barker » Mon Aug 13, 2018 8:16 pm

it will get loads this time

Harry Notts
Posts: 1657
Joined: Mon Aug 30, 2010 10:25 am
Rides:: C90ZZ C100 The Hound/SuBo.
Location: Sutton in Ashfield Nottinghamshire

Re: exhaust stud extraction - alloy head

Post by Harry Notts » Mon Aug 13, 2018 9:25 pm

Well done Barker. That's turned out brilliantly.

andyk1k
Posts: 678
Joined: Sat Mar 02, 2013 10:32 pm
Rides:: 1966 S90 1998 royal enfield 350
Location: willenhall nr Walsall
Contact:

Re: exhaust stud extraction - alloy head

Post by andyk1k » Tue Aug 14, 2018 7:37 am

Just shows patience works,probably why l have scraped so many,well done :D

barker
Posts: 3461
Joined: Sun Jun 06, 2010 8:38 am
Rides:: t80 honda90 nexus honda xr honda sh loncinyamaha vigaro 53suzukiaddress5
Location: west sussex

Re: exhaust stud extraction - alloy head

Post by barker » Tue Aug 14, 2018 5:14 pm

must admit patience is not my strong point either, but this time I paid attention to those who have, now do I fit studs or Allen bolts

User avatar
wightegi
Posts: 9709
Joined: Tue Sep 01, 2009 7:23 pm
Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
Location: Isle of Wight

Re: exhaust stud extraction - alloy head

Post by wightegi » Tue Aug 14, 2018 9:22 pm

Studs all the way ,are they M6 if so buy a metre length from toolsation and cut to length. I had M8 allen socket cap screws on my GS500 what a pain 3 drilled out and timeserts fitted plus steel studs.

Post Reply