Honda 110i Wave.

[Diesel Dave]

Well he has my C90 electric start puller so may be lucky.

[stevew]

Cheers AE. I'm pretty sure it's not the same as the e-start cub. I have one of those extractors here. Thread is too fine although the diameter looks about right.
I'll wait to hear from you.

The guys on the German Innova/Wave forum reckon it is a M30x1,5 female thread.

[stevew]

Well he has my C90 electric start puller so may be lucky.

Nah, sorry to say that doesn't fit. Thanks anyway Dave.

[davebike]

I got that here
If you want to borrow and I even here today Sunday doing LMRC basic maintenance day !

[AE86]

Hi Steve, (PM sent by the way)

Sorry I didn't get out until today. Been quite busy.

So here's the pullers I picked up. There are three different flywheels on the e-start Wave 110s over here, so I hope this helps. Here's what I can tell you without seeing yours. I haven't seen your flywheel and it very well might be different.


Here are the sizes I was given from the lady I go to all the time for parts.


(This one I suspect is yours) Coarse thread, 28 mm (looks like 28.25 on my calipers). I have no way to measure the threads so I am unsure of the precise pitch.






1 is the same as the e-start Cub, fine thread 27 mm.






1 size is a female coarse thread, 20mm. I assume not yours since you said male thread.




There is also a female fine thread, but it's a non e-start version.

[Wuyang]

Stevew.... I noticed in a pic that your wind sheild has one of those little flip things attatched. I seem to be right in the fire line of my Cubs wind shield receiving quite abit of buffeting.

So do you use it for the same reason.......how do you find it and how much should I be expected to pay

Cheers
Wuyang

[stevew]

Stevew.... I noticed in a pic that your wind sheild has one of those little flip things attatched. I seem to be right in the fire line of my Cubs wind shield receiving quite abit of buffeting.

So do you use it for the same reason.......how do you find it and how much should I be expected to pay

Cheers
Wuyang

'Tis one of these,
Ebay..291394594327
Works well and smooths things out well.

[stevew]

BTW off to Venhill in Dorking to get the puller i need tomorrow. £12.84

[Wuyang]

Cheers stevew

[stevew]

BTW off to Venhill in Dorking to get the puller i need tomorrow. £12.84

OK just for the record 2012-2014 Honda Wave 110i flywheel puller (extractor) is 30 x 1.5 mm Female thread. Available from Venhill in Dorking, UK. part VT67.

Engine all back together now and sounds sweet as a nut. Thanks to my own personal mechanic Mat the Splat
Gave it a little ride up and down the road today so going to re-fit the tupperware tomorrow.