I ordered a 20mm 16 tooth front sprocket for my 1981 C 90 from pit bike spares.
When it arrived the sprocket wouldn't fit the shaft due to the machined groves being smaller than the shaft.
PBS say they don't do any other type of sprocket, can anyone recommend a company available to help
Thanks guys
C90
-
wightegi
- Posts: 9719
- Joined: Tue Sep 01, 2009 7:23 pm
- Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
- Location: Isle of Wight
Re: C90
The 6 volt 90 engine is a one off no parts are interchangeable withe the 12 volt bikes . So you are going to have fun finding parts.
Edit to add
Wemoto do a plus 1 and plus 2 sprocket , go to their website find your bike and look at the choices , it even has the dimensions on there as well.I have the relevant page bookmarked for all my bikes ,it gives me an idea of prices
.
Edit to add
Wemoto do a plus 1 and plus 2 sprocket , go to their website find your bike and look at the choices , it even has the dimensions on there as well.I have the relevant page bookmarked for all my bikes ,it gives me an idea of prices
.-
Capitano
- Posts: 5767
- Joined: Wed Oct 27, 2010 8:05 pm
- Rides:: '92 C90, '97 Divvy 6, 36V home-built e-bike
- Location: West Sussex
- Contact:
Re: C90
1981 C90
Front sprocket +1 tooth
http://www.wemoto.com/bikes/honda/c_90/ ... in_length/
Front sprocket +2 teeth
http://www.wemoto.com/bikes/honda/c_90/ ... in_length/
Front sprocket +1 tooth
http://www.wemoto.com/bikes/honda/c_90/ ... in_length/
Front sprocket +2 teeth
http://www.wemoto.com/bikes/honda/c_90/ ... in_length/