enduro bike project
-
- Posts: 1288
- Joined: Thu May 27, 2010 2:47 pm
- Rides:: several honda c90's c70 and c50, lambretta li special puch and a honda cbf
- Location: sheffield
Re: enduro bike project
Looks good ,try and work out a place for a clock /stop watch to be fixed on your handle bars or bracket as you normally go out for a set time before change over, then you and the pits know when your coming back in ( the pit crew also have a clock/stop watch ) at Anglesey some lads in another bay actually hung a large kitchen clock on there bay wall
-
- Posts: 80
- Joined: Mon Dec 19, 2016 11:58 am
- Rides:: retro's
- Location: matlock
Re: enduro bike project
The bracket will be cut down but ill leave for now to see if it caan be used for a timer or maybe an after market rev counter.
keep the advice coming. i will certainly need it.
waas thinking of a neww lifan110 engine for it but worried that it will not get run in before the enduro.
can these engines be run pretty hard from new ?
keep the advice coming. i will certainly need it.
waas thinking of a neww lifan110 engine for it but worried that it will not get run in before the enduro.
can these engines be run pretty hard from new ?
- Ventura
- Posts: 621
- Joined: Thu Nov 24, 2011 8:46 pm
- Rides:: '91 C90, '73 ST70 & Z50, '76 TL125, '80 Bultaco 250, '16 Yam XSR900,
- Location: Merseyside
Re: enduro bike project
It'll be run in by the end of the second sighting lap!!
V.
V.
-
- Posts: 1288
- Joined: Thu May 27, 2010 2:47 pm
- Rides:: several honda c90's c70 and c50, lambretta li special puch and a honda cbf
- Location: sheffield
Re: enduro bike project
Some lads in our bay at Anglesey raced with a brand new 110 engine in and half way through I was chatting to one and he told me it had even got the transportation oil in it as they didn't know so the next time they came in they did an oil change .That is the second time I've heard someone literally putting a brand new engine in and racing it ,go for it
-
- Posts: 80
- Joined: Mon Dec 19, 2016 11:58 am
- Rides:: retro's
- Location: matlock
Re: enduro bike project
thanks
will be on the lookout for a 110 engine then.
really itching to get the engine in and running then sorting the rest of it out to suit.
will be on the lookout for a 110 engine then.
really itching to get the engine in and running then sorting the rest of it out to suit.
- Andrewwoey
- Posts: 1246
- Joined: Thu Jun 30, 2011 7:59 am
- Rides:: CM91, plus many others in the garage.
- Location: Near Kidderminster
Re: enduro bike project
Hi Fazey
Welcome to the forum. I wondered if these bikes were your sort of thing. I am Andy that had the NSR gag bike on display with your AR at Stafford. I see you have more projects on the go. I look forwards to the build.
Andy.
Welcome to the forum. I wondered if these bikes were your sort of thing. I am Andy that had the NSR gag bike on display with your AR at Stafford. I see you have more projects on the go. I look forwards to the build.
Andy.
-
- Posts: 80
- Joined: Mon Dec 19, 2016 11:58 am
- Rides:: retro's
- Location: matlock
Re: enduro bike project
hi andy
who would of thought you would be on here. thought you where 2 stroke only.
yeah gota few to do at the minute. looking forward to doing this one.
you off to newark show this weekend. hoping can find a engine for the c90.
nice to hear from you again.
who would of thought you would be on here. thought you where 2 stroke only.
yeah gota few to do at the minute. looking forward to doing this one.
you off to newark show this weekend. hoping can find a engine for the c90.
nice to hear from you again.
- Diesel Dave
- Posts: 11055
- Joined: Tue Oct 13, 2009 7:25 pm
- Rides:: 1965 Enfield Diesel, 2017 Sterling, Modenas Kriss and CT200 - the only Cub left
- Location: Brentwood, Essex
Re: enduro bike project
I'd agree with that - Andy you need to stick to 2 strokes and you can be our new 'Stroker Ace'.
I'm sure Boggs can fit you up with a V90.......
I'm sure Boggs can fit you up with a V90.......
- Andrewwoey
- Posts: 1246
- Joined: Thu Jun 30, 2011 7:59 am
- Rides:: CM91, plus many others in the garage.
- Location: Near Kidderminster
Re: enduro bike project
I doubt i will make Newark. I have run out of storage space so i have to keep away from any temptations. Had a cub of some sorts for many years. Had some good adventures on the club runs and camping weekend.
Yes Dave, i did hear that Bogger was clearing out some rubbish. He was also thinking of shifting that 200 thing he as
I've been called a bit of a stroker many times
Yes Dave, i did hear that Bogger was clearing out some rubbish. He was also thinking of shifting that 200 thing he as
I've been called a bit of a stroker many times
-
- Posts: 80
- Joined: Mon Dec 19, 2016 11:58 am
- Rides:: retro's
- Location: matlock