C90Club.co.uk

Hi thanks for the add.
Bought this bike for the plop enduro (well 4 of us have)
Didnt really want to ruin a good road bike so we bought this in bits.
Lots of bits but all over the place, started yesterday looking at the front suspension and trying to work out what i needed. a look around all the bits, i realised we were missing a few. took me all afternoon to work out the front suspension but got there in the end.
(New bushes and bolt kit ordered.
The bike came with a yx 140 engine so this will have to go, i'm looking for a c90 engine if anyone as one for sale or swap for the yx140.
Anyway a few pics of the ongoing project
Think i may need you help.















And here is what i have just finished (sorry couldnt help it)

don't believe you

Can hardly believe myself some times

Love the AR

You might struggle in scrutineering with the engine on the bench in the second picture ,they have tightened up a lot

is that a kepspeed frame if so what are your thoughts about it does most of the c90 bits fit i want to do a small enduro bike out of a c90 but i am going to use cb100 forks i have two sets of these

sorry i dont know what a kepspeed frame is. im assuming its a c90 frame. guess thats the trouble when you buy a box of bits.

i bought last night off of ebay a engine on a whim because it was cheap.
i think maybe i shouldnt of been so hasty.
anyone help with the year of this model c90e-216017
im guessing this is a 6 volt 89cc model. and no use for enduro ?

somethings not right, that picture of the frame is a later 12v model but the number you quoted is for a early 6v 90. it should start HA02E...XXXXXXXX and not c90e

can you post a picture of the underside of the frame, so we can inspect the welding on the joints to see if its a kepspeed. replacement frame

sorry i think i'm confusing the issue
The bike frame is a 1989 model
The engine i bought off of ebay last night on a whim for £50.
I take it that the engine will not fit the frame is this correct ?