Pivoting footrest bar with rubber footpegs and sidestand.
- Glenn
- Posts: 2121
- Joined: Thu Sep 23, 2010 5:34 pm
- Rides:: Honda C90T 96 on S plate, Street Triple, R6
- Location: Kent
Pivoting footrest bar with rubber footpegs and sidestand.
I am looking for a set of these because when I move my cub in and out of my shed, my stock pegs are getting caught on the front wheel of my Triumph and that is annoying.
Help please.
P.S. Its a 96 model C90.
Help please.
P.S. Its a 96 model C90.
- wightegi
- Posts: 9727
- Joined: Tue Sep 01, 2009 7:23 pm
- Rides:: 12v 1988 e start C90,Royal Enfield Interceptor 650
- Location: Isle of Wight
Re: Pivoting footrest bar with rubber footpegs and sidestand
There yuo go pit bike parts are where I got my lifan from and a few other members have used them good, service and quick delivery
but it is christmas
http://www.pitbikeparts.co.uk/footrests ... hfais8kud5
but it is christmas
http://www.pitbikeparts.co.uk/footrests ... hfais8kud5
- dread
- Posts: 2471
- Joined: Thu Oct 06, 2011 9:52 pm
- Rides:: lamb chop, vespa cutdown. italjet dragster chopper
- Location: huntingdon
Re: Pivoting footrest bar with rubber footpegs and sidestand
i had been planning on cutting some up to make custom cub ones, my self. there is a set on ebay thumpster with out side stand for 10 plus 6 postage.
- Glenn
- Posts: 2121
- Joined: Thu Sep 23, 2010 5:34 pm
- Rides:: Honda C90T 96 on S plate, Street Triple, R6
- Location: Kent
Re: Pivoting footrest bar with rubber footpegs and sidestand
Yeah but I whant it to look stock. Apparently the CT110 has them.
- dread
- Posts: 2471
- Joined: Thu Oct 06, 2011 9:52 pm
- Rides:: lamb chop, vespa cutdown. italjet dragster chopper
- Location: huntingdon
Re: Pivoting footrest bar with rubber footpegs and sidestand
yes thats exactly what i am planning cutting the ends off, and welding to the cub bar. might have to drill out the centers and load a slug in there. before weldingGlenn wrote:Yeah but I whant it to look stock. Apparently the CT110 has them.
- Ventura
- Posts: 621
- Joined: Thu Nov 24, 2011 8:46 pm
- Rides:: '91 C90, '73 ST70 & Z50, '76 TL125, '80 Bultaco 250, '16 Yam XSR900,
- Location: Merseyside
Re: Pivoting footrest bar with rubber footpegs and sidestand
Ive been looking at the same thing to fit to a Cub.Glenn wrote:
But from the photos it doesnt look as tho the pegs rise as high as on the stock Cub peg bar.
Can anyone say if the footpeg height ends up the same when fitting one of these Monkey/Pitbike peg bars, or will they end up lower?
Or is a better alternative to just weld pivoting footpegs to the standard bar?
Any advice would be greatly appreciated.
Cheers.
V.
- dread
- Posts: 2471
- Joined: Thu Oct 06, 2011 9:52 pm
- Rides:: lamb chop, vespa cutdown. italjet dragster chopper
- Location: huntingdon
Re: Pivoting footrest bar with rubber footpegs and sidestand
THEY ARE NOT ANY WHERE NEAR AS HI, almost flat, as i say if you really want the folding part. the best way i can think of, is to do what i posted first off, lop off both sets drill hole in the ends of all and push a slug in, then connect the ends and weld em up. the pit ones do not fit the Mteck pipe, and as i am going to use one that is how i am looking to go.
- Ventura
- Posts: 621
- Joined: Thu Nov 24, 2011 8:46 pm
- Rides:: '91 C90, '73 ST70 & Z50, '76 TL125, '80 Bultaco 250, '16 Yam XSR900,
- Location: Merseyside
Re: Pivoting footrest bar with rubber footpegs and sidestand
Cheers for the reply Dread.
Looks like I'll go with your good suggestion then. Lop 'em off and reweld onto the original bar it is then!!:)
V.
Looks like I'll go with your good suggestion then. Lop 'em off and reweld onto the original bar it is then!!:)
V.
- dread
- Posts: 2471
- Joined: Thu Oct 06, 2011 9:52 pm
- Rides:: lamb chop, vespa cutdown. italjet dragster chopper
- Location: huntingdon
Re: Pivoting footrest bar with rubber footpegs and sidestand
you could do it with sleeves just as easily if not more so.
tomorrow i'll take pictue of the two side by side, you'll see the difo then
tomorrow i'll take pictue of the two side by side, you'll see the difo then
- Ventura
- Posts: 621
- Joined: Thu Nov 24, 2011 8:46 pm
- Rides:: '91 C90, '73 ST70 & Z50, '76 TL125, '80 Bultaco 250, '16 Yam XSR900,
- Location: Merseyside
Re: Pivoting footrest bar with rubber footpegs and sidestand
Cheers Dread.
That'd be much appreciated.
Good idea on sleeving too. Would likely give more support than the small slug.
V.
That'd be much appreciated.
Good idea on sleeving too. Would likely give more support than the small slug.
V.